FORTEC STAR FS-333 || gx6605s || dvd av card || DVD.AV.CARD_RECEIVER,

  FORTEC STAR FS-333

 

The Fortec Star FS-333 receiver that utilizes the GX6605S chipset is known for its capabilities in receiving satellite signals and decoding digital content. If you're seeking information about updating the software or firmware of the Fortec Star FS-333 GX6605S receiver, here are general steps that could guide you through the process

FORTEC STAR FS-333

1. Check for Updates: Visit the official Fortec Star website or reliable forums/groups dedicated to satellite receivers. Look for any available software or firmware updates specifically designed for the FS-333 model with the GX6605S chipset.

2. Download the Update: If there's an updated software version available, download it to your computer. Ensure that the update is compatible with your Fortec Star FS-333 receiver.

3. Transfer to Receiver: Transfer the downloaded update file to a USB flash drive. Follow any instructions provided by Fortec Star or the readme file to properly format the USB drive and place the update file in the root directory.

4. Insert USB Drive: Insert the USB drive into the USB port on your Fortec Star FS-333 receiver

5. 
   

FORTEC STAR FS-333

If you encounter any issues or uncertainties during the update process, contacting Fortec Star's customer support or referring to their official documentation for the FS-333 GX6605S receiver would be recommended for accurate guidance and troubleshooting 

FORTEC STAR FS-333

As with any device updates, make sure to follow the specific instructions provided by Fortec Star for updating the FS-333 receiver. These steps are general guidelines and may differ slightly based on the receiver's firmware version and the update method provided by the manufacturer

Hello Guys Today

I will share you a software for your Receiver if you want to upgrade your receiver or your receiver is in dead position you can recover or upgrade your box through Rs232 Cable and can upgrade via USB here is details about the box and software.

How to Upgrade

Download & Copy your 

Software or Flash file in your USB/Flash Drive without any Folder and insert yur USB Flash Drive to your Receiver box and go to the upgrade page your File will show here now Select All Code and below select your file then click on upgrade after loading software click on YES. It will take some time to complete upgrade then it will restart your receiver.

Success…!

You have Successfully upgraded your Receiver Box Thanks.

Cautions

Please make sure you are on UPS during upgrade or do not shutdown or power cut of your receiver during upgrade.

Initiate Update: Access the receiver's settings menu or system settings. Navigate to the software update or firmware update section. Follow the on-screen prompts to start the update process.

1. Wait for Completion: The update process may take some time. Ensure that the receiver remains powered on and connected to a stable power source during the update. Avoid interrupting the update process until it's completed.

2. Restart and Verify: After the update completes, the receiver might automatically restart. Check the system information or settings to confirm that the update was successful and that you're now running the latest software version